Taoke 11.1V 2200mAh 35C LiPo Battery Pack with T Plug for RC UAV Drone FPV Rechargeable Battery Pack for RC Drone Quadcopter Helicopter FPV Racing Hobby

Name: Graphene lithium battery with T Plug Specification: 2200mah 11.1v 35c Product Size: 93*43*22MM Product Weight: 160G Package Size: 14*5*5MM Charging current: 1-5A charging is ideal Continuous rate: 35C Charging time: 1 hour Charging voltage: 12.6V Method of use 1. Burning: Charging with a non-lithium battery charger may cause damage, smoke, heat or burn to the lithium battery! For lithium battery packs, we recommend that you use a lithium battery balance charger to charge! 2. Damage: Over-discharge, over-charge or reverse charging will immediately damage the lithium battery. 3. Charging: The charging current must not be greater than 1/2 of the battery capacity, and the charging cut-off voltage is 4.20V±0.05V per battery. 4. Discharge: When using the battery pack for the first time, please use a standard balance charger to charge it. Do not over-discharge the new battery for the first time. When using it continuously, please check the battery voltage. The total voltage of the 3-string battery pack must not be lower than 8.4V, the total voltage of the 2-string battery pack must not be lower than 5.6V, and the voltage of a single battery must not be lower than 2.8V. Voltages lower than these rated voltages will cause the battery to swell, fail, and even be damaged. 5. Storage: The self-discharge rate of lithium batteries is higher than that of NiMH/Ni-C batteries, and they are prone to over-discharge. If the product is not used for a long time, please remove the battery and check the battery voltage regularly to keep the voltage of a single battery between 3.8V-3.9V. Storage conditions: temperature -20°C~+35°C; relative humidity 45%~85%. Tips: Do not expose the battery to fire, burn, short-circuit, or decompose it. Avoid direct sunlight and moisture. Precautions 1. Lithium battery cells are packed in plastic film. Do not scratch, collide or puncture the battery surface with sharp objects. 2. The lithium battery tabs are not very strong and are easy to break when bent, especially the positive tabs. 3. The lithium battery pack has been well welded. Do not disassemble or re-weld it. 4. In theory, there is no flowing electrolyte in lithium batteries, but if the electrolyte leaks and contacts the skin, eyes or other parts of the body, rinse with clean water or seek medical attention immediately. 5. Do not use damaged battery cells (damaged seals and edges, damaged shells, smell of electrolyte, electrolyte leakage, etc.). 6. If the heat increases sharply, please stay away from the battery to avoid unnecessary damage.